What Happens When You Call for a Pool Service? 

Recently, you noticed that your pool looks less appealing to swim in and its color starts to change from cool blue to horrid green. For these instances, you have to call a pool maintenance expert to address the problem and provide you with the highest quality pool service.  

Pool Service 

When these professionals arrive at your door, they would first do a series of tests to determine what’s really wrong with your pool. It’s important that all the chemicals in the water are balanced to ensure safe swimming for the whole family. Here’s a rundown of what they’ll check: 

  1. pHLevel  

The pH level of the pool should be right within the acceptable value, which is between 7.2 and 7.6. Anything more or below that value could propose some problems. A pool with a below 7 pH level may cause corrosion to the plumbing fixtures, as well as wrinkling of the liner. It will also lead to irritated eyes and skin. On the other hand, if the pH level of the pool nears 8, the water will look cloudy and the filters will choke for working too hard.  

  1. Alkalinity Level 

Ideally, a pool’s bicarbonate alkalinity level should be between 80 ppm and 120 ppm. This value stabilizes the pH level, thus preventing rapid changes. If the total alkalinity is too low, then problems like etched plaster walls, corroded metals, and stained floors are expected. This condition also causes the water to turn green. On the other hand, if the total alkalinity level is too high, the water becomes acidic and chlorine loses its disinfecting ability.  

  1. Chlorine 

Chlorine keeps the pool healthy, as its job is to ward off pathogens that may thrive in stagnant water. The ideal chlorine level is between 1.0 and 3.0 parts per million. If there’s too much of it, swimmers will develop red eyes and start to itch. If the chlorine level is too low, then it can’t efficiently perform its work as a disinfectant.  

  1. TDS

TDS pertains to Total Dissolved Solids and it pertains to the total measure of all soluble substances dissolved in the water. For regular freshwater swimming pool, the TDS level of 1,500 ppm is the maximum recommended value. If it’s more than that, then the pool water will become cloudy and the surfaces become stained. The water gets hard and acquires a salty taste.  

  1. CyanuricAcid 

Cyanuric acid is usually added to the pool to stabilize chlorine that tends to dissipate in direct sunlight. It also allows homeowners to easily manage the pool’s chemistry, thus allowing for weekly water maintenance, instead of daily. However, the build-up of this chemical in the pool may also cause a lot of problem, particularly in allowing the growth of chlorine-resistant microorganisms.  

If you want to know more about how pool services are carried out, talk to a trusted professional about it. An Irvine pool service expert should be able to explain to you in more detail how they keep swimming pools clean and safe for the entire family.  

 

Leave a Reply

Your email address will not be published. Required fields are marked *